Ultraviolet Dryer / Small UV curing machine

Ultraviolet Dryer / Small UV curing machine
Product Introduction:
The desktop UV curing machine is a small-sized equipment with conveying mesh net 200mm, 300mm, and 400mm in width. The lamp quantity can be either single or double, and the power of the high-pressure mercury lamps ranges from 1KW to 3KW for choice. The UV curing equipment is equipped with a timing function, and the compellent air cooling system ensures the service life of the lamps. The ultraviolet dryer is suitable for bonding of electronic components,laboratories and small-batch production.
Send Inquiry
Description
Technical Parameters

The machine is characterized with its compact size, which can be directly placed on the workbench, making it suitable for production in a limited space. It adopts a closed chamber structure and is equipped with 1KW-3KW high-pressure mercury lamps, enabling rapid curing of various UV materials.

The ultraviolet dryer is easy to install and operate. Complex assembly is not needed after unpacking the wood crate, just connect the power supply and it can be put into use immediately. The ultraviolet dryer has a clear operation panel with a simple button layout, making it easy for beginners to operate. The compellent air cooling system continuously dissipates heat, effectively reducing the working temperature of the lamp tubes, extending their lifespan to 800-1000 hours. The closed design also prevents the leakage of ultraviolet rays so as to ensure operational safety.

P-2
P-

The initial investment budget of the UV curing equipment is low, which can meet the basic curing needs of various industries. The cost-performance is outstanding: in the electronics industry, it is used for soldering flux on circuit boards and adhesive curing of mobile phone components, it is used to cure resin pendant coatings and metal badges with glue dripping, it is an ideal choice that combines low cost with practical functions.

Product model

RX200-1

RX200-2

RX300-1

RX300-2

RX400-1

RX400-2

One lamp power

1KW

1KW

2KW

2KW

3KW

3KW

Mesh belt width

200mm

200mm

300mm

300mm

400mm

400mm

Lamp quantity

1pc

2pc

1pc

2pc

1pc

2pc

Total power

1.2KW

2.2KW

2.2KW

4.2KW

3.2KW

6.2KW

Overall size(mm)

1000*410*885

1200*450*885

1000*510*885

1200*550*890

1000*650*955

1200*650*955

Lamp type

mercury lamp

Conveying speed

0.5-8M/min

Input height

0-100(mm) adjustable

Irradiation mode

irradiate downwards from the top

Mesh belt material

Teflon mesh belt

Input power

AC 220V 50/60Hz

 
 
 

 

Company Profile

 

 

product-1200-692

 

Exhibition Highlights

 

product-1200-1077

 

Certificate

 

product-1200-1301

product-1200-1900

 

FAQ

 

 

Q: Is your company a trading company or a manufacturer?

A: We are a manufacturer. Ergu Optoelectronics is a production-oriented enterprise specializing in the field of light curing.

Q: Will a quality certificate of equipment inspection be provided before shipment?

A: Yes.We promise that each delivered equipment will be accompanied by a written test report and a complete inspection video, and will only be shipped after the customer's confirmation.

Q: What advantages does ultraviolet light curing equipment have over traditional curing methods?

A: Rapid curing, can be completed in a few seconds to a few minutes, can significantly improve the production efficiency. Low-temperature curing can reduce thermal damage to heat-sensitive materials. No volatile organic compounds (VOCs) are produced during the curing process, making it more environmentally friendly. It can achieve high-precision control and meet the requirements of micron-level coating uniformity. The equipment occupies a small area and saves space.

Q: What are the common spectral bands of ultraviolet curing equipment?

A: Common bands include UVA (315-400nm), UVB (280-315nm), and UVC (200-280nm), among which the UVA band is the most commonly used in light curing applications.

Q: How does the irradiation distance of UV curing equipment affect the curing effect?

A: Generally speaking, if the irradiation distance is too close and the light intensity is too high, it may cause local overheating and excessive curing on the material surface. If the irradiation distance is too far and the light intensity weakens, it may cause incomplete curing. The appropriate irradiation distance should be determined based on the equipment power, light intensity distribution and material properties to ensure that the material surface uniformly receives sufficient and appropriate intensity of ultraviolet rays, thereby achieving a good curing effect.

Q: How often should the UV lamps of UV curing equipment be replaced?

A: There is no fixed standard for the replacement time of lamps, which depends on various factors. Lamps with high usage frequency lose energy more quickly. If the curing strength requirement is high, the lamp will also age more quickly. Generally, UV mercury lamps may need to be replaced after being used for 1,000 to 2,000 hours.When the lamp can not be turned on, can not reach the "ready" state, can not cure, obvious color change, tube expansion, etc., also need to be replaced. At the same time, 99% of the faults are often misdiagnosed as lamp faults, which may actually be the problem of other components in the system (such as capacitors, ballast, reflectors or igniters) and need to be identified.

 

Hot Tags: Ultraviolet Dryer / Small UV curing machine, China Ultraviolet Dryer / Small UV curing machine manufacturers, suppliers, Ultraviolet dryer for screen printing, Varnish Dryer, UV Cure Equipment, UV Curing Machine for Screen Printing, uv conveyor dryer, light curing equipment

Send Inquiry
Customized Exclusive Curing Solution
Professinal Team Is at Your Service
contact us